● 14-16km ibanga lokudlulisa okungenantambo
● Izithombe ezingu-1080P HD ezinokubambezeleka okuphansi
● I-Dual Tx antenna kanye ne-Rx antenna yokudlulisa isignali okuzinzile
● Iphrothokholi ye-COFDM yobunikazi yenzelwe ukudluliswa kwevidiyo okungenantambo
● Usayizi omncane nesisindo esilula seyunithi yesixazululo futhi kunesisindo esingu-65g/2.3oz kuphela
● I-AES128 bit encryption ifakwe ku-FPGA
● Imbobo ye-Ethernet RJ45 emithathu yokulayisha okuningi kwe-IP
● Izimbobo ze-Ethernet zisekela izindlela ezimbili ze-TCPIP/UDP zokudlulisa idatha
● Kokubili okungu-1400Mhz no-800Mhz kusekela ukuxhumana kwe-NLOS
● Ukudluliswa kabusha kwezinga eliphansi kanye nokugxuma kwamafrikhwensi okuguquguqukayo ukuze kunqande ukuphazamiseka
● Isixhumanisi se-TDD esingama-bi-directional esinevidiyo/i-telemetry
● UHF 800Mhz kanye no-1.4Ghz ngenketho
● Ukusetshenziswa kwamandla okuphansi 5W(Tx) kanye no-3.5W(Rx)
● Izinga lokushisa eliphezulu lisebenza
● IqinileUkuxhumana Okude Okungenantambo
Isixazululo se-RF enamandla aphansi(500mw) esihlanganisa i-algorithm ye-Advanced frequency hopping kanye nobuchwepheshe obumangalisayo bokunqanda ukuphazamiseka kwenza ibanga lokuxhumana lifike kumakhilomitha ayi-16.
● Fi-requency-Hi-oppingSpredSi-pectrum(I-FHSS)ngo-Anti-ukuphazamiseka
Ithimba le-IWAVE linama-algorithms alo kanye nezindlela zokugxuma amaza.
Ngesikhathi sokusebenza, isixhumanisi sedatha yedijithali ye-FNM-8416 sibala futhi sihlole isixhumanisi samanje ngokusekelwe emandleni esiginali atholiwe i-RSRP, isilinganiso se-signal-to-noise ratio SNR, izinga lebhithi lephutha i-SER nezinye izici. Uma isimo sokwahlulela saneliswa, i-frequency hopping iyenziwa bese kukhethwa iphuzu elifanele lefrikhwensi ohlwini.
● CI-Oded Orthogonal Frequency Division Multiplexing (COFDM)
Susa ngempumelelo ukuphazamiseka kwezindlela eziningi ekudluliselweni kwebanga elide
● Ilungele izindawo zasemadolobheni nezimboni
Ukuxhumana kwe-N-LOS kunikeza isignali yomsakazo enamandla ngenkathi iphikisana nokuphazamiseka futhi inqoba izindawo ezingaboni.
● AES128 Ukuvikela Ukubethela
Igwema ukuhlasela okunonya nokufinyelela okungagunyaziwe okuphakelayo kwevidiyo yakho ngesikhathi sangempela ngaphandle kokungenelela komsebenzisi.
I-FNM-8416 idatha engu-1.4Ghz kanye ne-800Mhz nesixhumanisi sevidiyo sisekela okokufaka kwedatha ye-UART futhi ifakwe nembobo ye-LAN engu-3. Ngazo abasebenzisi bangaxhuma i-UAV, ama-drones noma enye inkundla yendiza engenamuntu nge-PC esebhodini, ikhamera ye-IP noma okunye ukukhokhelwa kwe-IP.
Isixhumanisi sedatha se-FNM-8416 800Mhz kanye ne-1.4Ghz yakhelwe ukuthi ibe isixhumanisi sokudlulisa nokwamukela esichwepheshile sama-drones kanye ne-uav ekusetshenzisweni kwemboni, okufana nemephu yasemoyeni, ukuhlolwa kwemizila nokuvikelwa kwezilwane zasendle . Isetshenziswa ngobuchwepheshe bokushintshashintsha be-RF obusha obusekela ukunqanda ukuphazamiseka kwebanga elide lokuxhumana ngamandla aphansi kakhulu okudlulisa.
Imininingwane | ||
Imvamisa | 800Mhz | 806~826 MHz |
1.4Ghz | 1428~1448 MHz | |
Umkhawulokudonsa | 8MHz | |
RFAmandla | 0.6watt(Bi-Amp, 250mw isilinganiso samandla esikhulisi samandla ngasinye) | |
Dlulisa Ububanzi | 800Mhz: 16km1400Mhz: 14km | |
Isilinganiso Sokudlulisa | I-6Mbps (I-Video Stream, i-Ethernet Signal kanye nokwabelana kwedatha ye-serial)Ukusakaza kwevidiyo okungcono kakhulu: 2.5Mbps | |
Isilinganiso se-Baud | 115200bps(Iyalungiseka) | |
Ukuzwela kwe-Rx | -104/-99dbm | |
I-Fault Tolerance Algorithm | Ibhendi yesisekelo engenantambo ye-FEC yokudlulisela phambili iphutha lokulungiswa | |
Ukubambezeleka kwevidiyo | Ividiyo ayicindezelwa. Akukho ukubambezeleka | |
IsixhumanisiRebuildTimi | <1s | |
Ukushintshashintsha kwezwi | Uplink QNSK/Downlink QNSK | |
Ukubethela | I-AES128 | |
Isikhathi sokuqala | 15s | |
Amandla | I-DC-12V (7~18V) | |
Isixhumi esibonakalayo | 1. Izixhumi ezibonakalayo ku-Tx ne-Rx ziyefana 2. Okokufaka kwevidiyo/Okukhiphayo: I-Ethernet×3 3. Isixhumi esibonakalayo Sokufaka Amandla×1 4. I-Antenna Interface: SMA×2 5. I-Serial×1: (I-Voltage:±13V(RS232), 0~3.3V(TTL) | |
Izinkomba | 1. Amandla 2. Ethernet Status Indicator 3. Isikhombi Sokusetha Ukuxhumana Okungenantambo x 3 | |
Ukusetshenziswa kwamandla | Tx: 5WRx: 3.5W | |
Izinga lokushisa | Ukusebenza: -40 ~+ 85℃Isitoreji: -55 ~+85℃ | |
Ubukhulu | Tx/Rx: 57 x 55.5 x 15.7 mm | |
Isisindo | Tx/Rx: 65g | |
Idizayini | Ubuchwepheshe be-CNC | |
I-Double Aluminium Alloy Shell | ||
Umsebenzi we-anodizing osebenzayo |