In order to meet the OEM integration needs of unmanned platforms, IWAVE has launched a small-sized, high-performance three-band MIMO 200MW MESH board, which adopts multi-carrier mode and deeply optimizes the underlying MAC protocol driver. It can temporarily, dynamically and quickly build a wireless IP mesh network without relying on any basic communication facilities. It has the capabilities of self-organization, self-recovery, and high resistance to damage, and supports multi-hop transmission of multimedia services such as data, voice, and video. It is widely used in smart cities, wireless video transmission, mine operations, temporary meetings, environmental monitoring, public security firefighting, anti-terrorism, emergency rescue, individual soldier networking, vehicle networking, drones, unmanned vehicles, unmanned ships, etc.
FD-61MN is a high-performance MIMO 200MW self-organizing network board with a size of 60*55*5.7mm and net weight 26g(0.9oz). This board is highly integrated.
It offers 2* IPX radio frequency interface, 3 network ports, 2 RS232 data serial ports, 1 USB interface, and air-to-ground line-of-sight communication of 10km. Ground to grond NLOS 1km communication.
Key Features
●Strong diffraction ability: It has good anti-multipath interference ability and strong diffraction penetration ability under complex terrain conditions.
●Long transmission distance: Using MESH+TD-LTE technology, the receiving sensitivity can reach -106dBm, and the ground-to-air/air-to-air line-of-sight communication can reach 10km with 200mW transmit power.
●High transmission rate: Using multi-carrier QPSK/16QAM/64QAM adaptive modulation technology, under good signal-to-noise ratio conditions, the uplink and downlink rates can reach 30Mbps
●Large network scale: MAC protocol adopts IEEE802.11 protocol, channel resources are dynamically allocated, and actual testing can support 32 nodes for networking.
●Large number of relay hops: In actual testing, the number of video relay hops can reach more than 8 hops, which expands network coverage, improves the flexibility of self-organizing networks, and enhances the environmental applicability of network applications.
●Easy to use: no professional knowledge required, few configuration parameters, easy deployment, and available upon startup.
Function Features
●Software architecture: Centerless, distributed wireless self-organizing network based on IP system.
●Anti-multipath interference: Multi-carrier OFDM modulation has strong anti-multipath interference capabilities.
●Diffraction capability: The UHF band has strong diffraction and penetration capabilities.
●Dynamic routing: Layer 2 intelligent routing protocol (active/passive).
●Flexibility: Strong scalability, nodes can join and exit dynamically.
●Mobility: The maximum movement rate of tested nodes is 200km/h.
●Anti-destruction and self-healing: The damage of individual nodes will not affect the normal operation of the network and has strong anti-destruction capabilities.
●Working mode: point-to-point, point-to-multipoint, multipoint-to-multipoint, mesh network, automatic relay, MESH.
●IP transparent transmission: With IP transparent transmission function, the host computer only needs to focus on upper-layer applications.
●Internet expansion: Effectively extend the coverage of the Internet, any terminal in the network can be used as a gateway, and each node of the ad hoc network can access the Internet through the gateway node.
●Configuration management: Users can set the channel, bandwidth, power, rate, IP, key and other parameters of the MESH node.
●Status display: Users can dynamically display network topology, link quality, signal strength, communication distance, environmental noise floor, etc.
Post time: Jan-11-2024
