Nkwukọrịta Drone + Nhazi vidiyo na nyocha + njikọ data bi-directional agbakwunyere maka UAVs
Ọrụ anodizing na-arụ ọrụ na-eme ka iguzosi ike n'ezi ihe nke akara RF.
Nkà na ụzụ CNC okpukpu abụọ aluminom alloy na-egosipụta, mmetụta dị mma na-eguzogide na ikpo ọkụ.
➢ Nhọrọ ugboro ugboro: 800Mhz, 1.4Ghz
➢ Ihe ntinye vidiyo: HDMI na Ethernet
➢ Ma 1400Mhz na 800Mhz nwere ikike ịbanye maka ihe mgbochi.
➢ Kwado MAVLINK TELEMETRY
➢ Nkwado 2T 2R
➢ 1* Oghere Usoro ọdụ ụgbọ mmiri: Nbufe data n'akụkụ abụọ
➢ 2* Antennas: Dual Tx antenna na Dual Rx antenna
➢ 3*100Mbps Ethernet ọdụ ụgbọ mmiri na-akwado TCP/UDP
➢ 1/4 inch ịghasa oghere na Tx maka idozi na UAV
➢ H.264 Video mkpakọ
➢ Latency erughị 50ms
➢ Ọnụego Baud: 115200bps
➢ Obere nha na ibu dị oke ọkụ: N'ozuzu oke: 5.7 x 5.55 x 1.57 CM, arọ: 65g
FPS-8408 HD Sistemụ Nnyefe onyonyo nwere HDMI, ọdụ ụgbọ mmiri LAN abụọ na otu ọdụ ụgbọ mmiri serial bi-directional.
Obere HDMI na ọdụ ụgbọ mmiri LAN na-enyere uav nwere nhọrọ igwefoto ụdị abụọ.
Ọdụ ụgbọ mmiri serial na-akwado telemetry mavlink maka pixhawk. Site na ya ị nwere ike ijikwa UAV na ala na iyi vidiyo HD dị ndụ.
A na-etinye Drone Video Transmitter n'ọtụtụ ebe na mpaghara nke mberede ikuku na enyemaka ọdachi, iwu ọkụ ọkụ, na nyocha ọkụ eletrik, na-ebufe ma na-enweta ọtụtụ okwu ọma nke ndị ahịa.
FPS-8408 na-arụ ọrụ nke ọma na-eso ọnọdụ.
N'ime ime obodo ebe nkwurịta okwu na-adịghị mma, a na-eji ya ebufe coal na mineral.
Ọ bụ ezigbo nhọrọ maka nnapụta ọkụ mberede nke drone.
Mgbe ọdachi na-emere onwe ya mere, enwere ike itinye ya iji hụ na nkwurịta okwu mberede.
Ugboro ugboro | 800Mhz | 806 ~ 826 MHz |
1.4Ghz | 1428 ~ 1448 MHz | |
Bandwit | 8MHz | |
Ike RF | 0.4Watt (Bi-Amp, 0.4watt Peak Ike nke ọ bụla amplifier ike) | |
Nyefee Oke | 800Mhz: 7km | |
1400Mhz: 8km | ||
Ọnụego mbufe | 6Mbps (Video Stream, Ethernet Signal na Oghere Usoro nkekọrịta data) | |
Igwe vidiyo kacha mma: 2.5Mbps | ||
Ọnụego Baud | 115200bps(nwere ike idozi) | |
Mmetụta Rx | -104/-99dbm | |
Algorithm nnabata mmejọ | Ikuku baseband FEC mbugharị njehie | |
Ọgwụgwụ ruo Ọgwụgwụ Latency | 50-80ms maka 1080P60/720P60 ntinye vidiyo na ngbanwe | |
Oge mmeghari njikọ | <1s | |
Mgbanwe | Uplink QNSK/ Downlink QNSK | |
Izo ya ezo | AES128 | |
Oge mmalite | 15s | |
Ike | DC-12V (7 ~ 18V) | |
Interface | Interface na Tx na Rx bụ otu | |
Ntinye vidiyo/ mmepụta: Ethernet × 3 | ||
Ngwa ntinye ike ×1 | ||
Interface Antenna: SMA×2 | ||
Oghere Usoro × 1: (Voltaji:+-13V(RS232), 0~3.3V(TTL) | ||
Ihe ngosi | Ike | |
Ihe ngosi Ọnọdụ Ethernet | ||
Ihe ngosi ntọala njikọ ikuku x 3 | ||
Oriri ike | Tx: 4W (Max) | |
Rx: 3W | ||
Okpomọkụ | Na-arụ ọrụ: -40 ~ + 85 ℃ | |
Nchekwa: -55 ~+100 ℃ | ||
Akụkụ | Tx/Rx: 57 x 55.5 x 15.7 mm | |
Ibu | Tx/Rx: 65g | |
Nhazi | Teknụzụ CNC | |
Aluminom Alloy Shell okpukpu abụọ | ||
Ọrụ anodizing na-eduzi |