● Na-ebufe ike RF: 2W
●Nkwurịta okwu ogologo ogologo siri ike: 50km
● Kọmpat & dị fechaa: kacha mma maka UAV na nyiwe ndị ọzọ na-enweghị mmadụ
●Okpomọkụ na-arụ ọrụ: -40 - +85°C
● Kwado nzuzo AES
●Video IN: SDI+HDMI+Ethernet
●Dakọtara na ọtụtụ ndị na-ahụ maka ụgbọ elu, ngwa ọrụ ozi na ibu ọrụ.
● Ọnụego mbufe: 3-5Mbps
● Mmetụta: -100dbm/4Mhz, -95dbm/8Mhz
● Data Duplex: Nkwado SBUS / PPM / TTL / RS232 / MAVLINK
●Oghere ikuku: 30km
● bandwidth ugboro ugboro: 4MHz/8MHz nwere ike idozi
Ntinye vidiyo na ntinye
Na-akwado HD-SDI, HDMI na ntinye IP na mmepụta maka ma ikuku ikuku na nke ala, nke na-enyere gị aka iji ụdị igwefoto dị iche iche.
Nkwụnye & felie
Emebere FIM-2450 onye na-ebufe vidiyo drone ka ọ hazie ma rụọ ọrụ na igbe ahụ na-enweghị usoro nhazi mgbagwoju anya.
50KMOgologo ogologoNzikọrịta ozi
Algọridim ọhụrụ na-enyere aka nkwurịta okwu Ogologo anya maka 50km ikuku ruo n'ala.
Mkpebi HD zuru oke
E jiri ya tụnyere sistemụ analog na-ebunye mkpebi SD, FIM-2450 dijitalụ na-enye nkwanye vidiyo 1080p60 hd.
Obere oge
Na-egosipụta ihe na-erughị 40ms nke latency, njikọ vidiyo FIM-2450 drone na-enyere gị aka ịhụ ma jikwaa ihe na-eme ndụ. Ọ na-enyekwara gị aka ife efe drone, tụọ igwefoto ma ọ bụ rụọ ọrụ gimbal.
Ihe nzuzo adịchaghị
Ihe nzuzo AES-128 na-egbochi ohere ịnweta vidiyo ikuku ikuku gị n'enwetaghị ikike.
Nhọrọ ọtụtụ ugboro
FIM-2450 na-ebufe ụgbọ elu ụwa niile na-akwado 900MHZ / 1.4Ghz ọtụtụ nhọrọ ugboro ugboro maka gị izute gburugburu RF dị iche iche.
FIM-2450 drone video downlink system ka ndị ụlọ ọrụ mmanye iwu webatara iji tinyekwuo nchekwa na nchekwa maka ịrụ ọrụ n'ala. Njikọ vidiyo Drone na-eme ka ị hụ nke ọma ihe na-eme na ndụ, nke na-arụ ọrụ dị mkpa na ihe mberede mberede dị ka nyocha nke eriri mmanụ mmanụ, nyocha nke elu elu, nlekota ọkụ ọhịa na ihe ndị ọzọ. .
900MHZ | 902 ~ 928 MHz | |
Ugboro ugboro | 1.4Ghz | 1430 ~ 1444 MHz |
Bandwit | 4/8Mhz | |
Ike RF | 2W | |
Nyefee Oke | 50km | |
Ọnụego mbufe | 1.5/3/6Mbps ( iyi koodu vidiyo na data serial) iyi vidiyo kacha mma: 2.5Mbps | |
Ọnụego Baud | 115200 (nke a na-agbanwe site na ngwanrọ) | |
Mmetụta Rx | -102dBm@4Mhz/-97@8Mhz | |
Algorithm anabataghị mmejọ ikuku | Ikuku baseband FEC mbugharị njehie mgbazi/ codec vidiyo super njehie | |
Oge nkwụsị vidiyo | Latency maka itinye koodu + nnyefe + ngbanwe 720P60 <40 ms 1080P30 <60ms | |
Oge mmeghari njikọ | <1s | |
Mgbanwe | Uplink QPSK/ Downlink QPSK | |
Usoro mkpakọ vidiyo | H.264 | |
Oghere Agba vidiyo | 4:2:0 (Nhọrọ 4:2:2) | |
Izo ya ezo | AES128 | |
Oge mmalite | 25s | |
Ike | DC-12V (10 ~ 18V) | |
Interface | Interface na Tx na Rx bụ otu 1. Ntinye vidiyo / mmepụta: Obere HDMI × 1, SMAX1 (SDI, Ethernet) 2. Ntinye ike × 1 3. Interface: 4. SMA×2 5. Oghere Usoro × 2: (± 13V(RS232)) 6. LAN: 100Mbps x 1 | |
Ihe ngosi | 1. Ike 2. Tx na Rx Ngosipụta Ọrụ 3. Ihe ngosi na-arụ ọrụ Ethernet | |
Oriri ike | Tx: 17W (Max) Rx: 6W | |
Okpomọkụ | Na-arụ ọrụ: -40 ~ + 85 ℃Nchekwa: -55 ~+100 ℃ | |
Akụkụ | Tx/Rx: 73.8 x 54 x 31 mm | |
Ibu | Tx/Rx: 160g | |
Ihe Nrụpụta Igwe Ọla | Teknụzụ CNC | |
Aluminom Alloy Shell okpukpu abụọ | ||
Ọrụ anodizing na-eduzi |